Home automation that installs fast and looks after itself
Devices, tools and documentation for the person doing the fitting. Configure several units at once from your phone, then keep an eye on them from a browser without going back to site.
Batch configuration
Fourteen devices in one home are not configured one at a time. The app finds them, puts them on the network and assigns the static IP in a single pass.
Know what is happening without going to look
The console shows each device’s last seen and firmware version. The one that has dropped off shows up in a list, not by opening a blind box.
Works across the whole range
Gen2, Gen3 and Gen4. An installation mixing hardware from different years is managed the same way, with no need to remember which generation each unit is.
New in the shop
Relays, meters, dimmers and installation accessories. Prices include VAT, and delivery is free from €30.
-
Transformadores de Corriente Shelly 50A. Pinza de Medición
11,57 € Add to cart -
Toma de corriente empotrable blanca
7,97 € Add to cart -
Tira LED RGBWW 19W/m 24V IP67 5m
34,52 € Add to cart -
Tira LED RGB 24V 60LED/m 5m IP65 – Decoración y Acento
25,24 € Add to cart -
Tira LED COB 24V 320LED/M 5m CRI90 – Luz Uniforme
14,83 € Add to cart -
The Pill By Shelly
8,86 € Add to cart -
Soporte Serie Mini Gen3, Gen4 45º
3,63 € Add to cart -
Soporte carril DIN Shelly EM
4,50 € Add to cart
Installation guides
What we have learned on site: why a meter reads high, how to recover devices after a router change, which setting makes a two-way circuit behave as it should.
-
Which Shelly EM to buy for a V2C Trydan charger
The classic EM and 3EM work; the EM Gen3 does not, because the integration reads one specific API. Where each clamp goes,…
-
The Shelly EM reads low at low current: why, and how to prove it
Between 1 and 1.5 A is 2-3% of full scale on a 50 A clamp. The check that tells the device’s limit…
-
Automating a garage door from your phone
The control board already has 12 V and a button input waiting for a contact. The remote keeps working, and momentary mode…
Set up a device from your phone
The SIT-IoT app finds the device, puts it on the client’s network and assigns its IP. Scan the network, check status and update firmware without opening a laptop. Gen2, Gen3 and Gen4.