SIT-IoT Smart Installer Tool is our Android app for installers: the tool you use with the phone in your hand, standing at the panel, to get devices connected and working without fighting the configuration.
Setup without the friction
- Wi-Fi scanner: find the network and connect the device in a few taps, without leaving the app.
- Automatic static IP: the new device gets its address without you working it out or typing it in. That is where most of the time goes on an installation with several units, and where the mistakes creep in.
- Documentation to hand: manuals and device sheets inside the app. No hunting for a PDF on your phone halfway through a job.
Supported devices
The main coverage is the Shelly range:
- Relays: Shelly 1, 1PM, 2.5, Plus 1, Plus 1PM
- Dimmers: Shelly Dimmer 2, Shelly Plus Dimmer
- Meters: Shelly EM, Shelly 3EM
- Other: Shelly Plug S, Shelly Bulb, Shelly RGBW2
It works with every generation: Gen2, Gen3 and Gen4. The models above are examples, not the full list — if the device belongs to one of those generations, the app configures it.
It also configures devices from other brands, and that list keeps growing.
Who it is for
For the professional installer fitting several devices in one home, who needs each of them to end up with the right IP, the right network and its documentation in order. And for the enthusiast who wants the same result without learning the manual process.
On the figures the app itself reports, installers using it cut the time spent on configuration and troubleshooting by more than 40%.
Get it
It is published on Google Play, under Tools: SIT-IoT Smart Installer Tool
Devices you provision from the app then appear in the web console, where they are managed and monitored.
Mobile app manual — all twelve menu items explained one by one.