Home automation that installs fast and looks after itself
Devices, tools and documentation for the person doing the fitting. Configure several units at once from your phone, then keep an eye on them from a browser without going back to site.
Batch configuration
Fourteen devices in one home are not configured one at a time. The app finds them, puts them on the network and assigns the static IP in a single pass.
Know what is happening without going to look
The console shows each device’s last seen and firmware version. The one that has dropped off shows up in a list, not by opening a blind box.
Works across the whole range
Gen2, Gen3 and Gen4. An installation mixing hardware from different years is managed the same way, with no need to remember which generation each unit is.
New in the shop
Relays, meters, dimmers and installation accessories. Prices include VAT, and delivery is free from €30.
-
Pinza de Corriente Shelly CT 50A con Conector 2-pin MX3.0-2x1Y
13,88 € Add to cart -
Toma de corriente empotrable blanca
8,90 € Add to cart -
Tira LED RGBWW 19W/m 24V IP67 5m
34,52 € Add to cart -
Tira LED RGB 24V 60LED/m 5m IP65 – Decoración y Acento
23,46 € Add to cart -
Tira LED COB 24V 320LED/M 5m CRI90 – Luz Uniforme
16,90 € Add to cart -
The Pill By Shelly
9,90 € Add to cart -
Soporte Serie Mini Gen3, Gen4 45º
3,63 € Add to cart -
Soporte carril DIN Shelly EM
4,50 € Add to cart
Installation guides
What we have learned on site: why a meter reads high, how to recover devices after a router change, which setting makes a two-way circuit behave as it should.
-
The DHT sensor on the Shelly Add-on stops reading after a few hours: DHT21 versus DHT22
It reads for a few hours, goes blank and recovers after a power cut: a hung DHT. The Add-on supports only the…
-
“Open/Closed” in the Shelly app: the limit switch on a virtual component
The “On/Off” toggle is the relay, not the gate. The real state is the Add-on’s input:100, and a virtual Boolean with its…
-
Shelly EM into Home Assistant over MQTT: topics, units and the Energy dashboard
What the Gen1 EM publishes under shellies/shellyem-…/emeter, in which units, and the sensor YAML: total and total_returned in Wh for the Energy…
Set up a device from your phone
The SIT-IoT app finds the device, puts it on the client’s network and assigns its IP. Scan the network, check status and update firmware without opening a laptop. Gen2, Gen3 and Gen4.